12.1 Overview of US Financial Markets - Principles of Finance | OpenStax (2024)

Learning Outcomes

By the end of this section, you will be able to:

  • Identify the various aspects of the US money markets.
  • Characterize government and corporate bond markets.
  • Detail the structure and operations of US equity markets.

Money Markets

The money market is a multitrillion-dollar market. Features of money market securities include being short-term (with maturities of less than one year) and very low risk (rarely failing to make their required payments). Further, money market securities are also liquid, which means that they trade easily without losing value.

Financial institutions, corporations, and governments that have short-term borrowing and/or lending needs issue securities in the money market. Most of the transactions are quite large, with typical amounts of $10,000, $100,000, $1 million, or more. Money market securities are available in smaller amounts if you choose to invest in money market mutual funds (MMMFs) or certain types of exchange-traded funds (ETFs).

Treasury bills (T-bills) are short-term debt instruments issued by the federal government. T-bills are auctioned weekly by the Treasury Department through the trading window of the Federal Reserve Bank of New York, with maturities of 4, 8, 13, or 26 weeks. The Treasury also auctions 52-week T-bills once every four weeks. The federal government uses T-bills to meet short-term liquidity needs. T-bills have very short maturities and a broad secondary market and are default-risk free. T-bills are also exempt from state and local income taxes. As a result, they carry some of the lowest effective interest rates on publicly traded debt securities.

The volume of T-bills auctioned depends upon government borrowing needs. Much of the money raised at weekly T-bill auctions goes to repay the money borrowed 4, 8, 13, 26, or 52 weeks earlier. The gross amount of new T-bills issued in December 2020 was $1,591.1 billion, and the amount of T-bills retired in the same month was $1,570.6 billion, resulting in net new borrowing of “only” $20.5 billion.

In addition to the regular auction of new T-bills, there is also an active secondary market where investors can trade used or previously issued T-bills. Since 2001, the average daily trading volume for T-bills has exceeded $75 billion.

Commercial paper (CP) is a short-term, unsecured debt security issued by corporations and financial institutions to meet short-term financing needs such as inventory and receivables. For example, credit card companies use commercial paper to finance credit card payments. Commercial paper is a short-term debt instrument, with a typical maturity of 30 days and up to 270 days. The short maturity reduces US Securities and Exchange Commission (SEC) oversight. The lesser oversight and the unsecured nature of CP means that only highly rated firms are able to issue the uninsured paper.

Commercial paper typically carries a minimum face value of $100,000 and sells at a discount, with the face value as the repayment amount. Corporations and financial institutions, not the government, issue CP; thus, returns are taxable. Further, unlike T-bills, there is not a robust secondary market for CP. Most purchasers are large, such as mutual fund investment companies, and they tend to hold commercial paper until maturity. The default rate on commercial paper is typically low, but default rates did increase into the double-digit range during the financial crisis of 2008.

Negotiable certificates of deposit (NCDs) are very large CDs issued by financial institutions. They are redeemable only at maturity, but they can and often do trade prior to maturity in a broad secondary market. NCDs, or jumbo CDs, are so called because they sell in increments of $100,000 or more. However, typical amounts are $1 million, with a maturity of two weeks to six months.

NCDs differ in some important ways from the typical CD you may be familiar with from your local bank or credit union. The typical CD has a maturity date, interest rate, and face amount and has FDIC insurance. However, if an investor wishes to cash out prior to maturity, they will incur a substantial penalty from the issuer (bank or credit union). An NCD also has a maturity date and amount, but it is much larger than a regular CD and appeals to institutional investors. The principal is not insured. When the investor wishes to cash out early, there is a robust secondary market for trading the NCD. The issuing institution can offer higher rates on NCDs compared to CDs because it knows it will have use of the purchase amount for the entire maturity of the NCD and because the reserve requirements on NCDs by the Federal Reserve is lower than for other types of deposits.

Investment companies such as Vanguard and Fidelity, among many others, sell shares in money market mutual funds (MMMFs). The investment company purchases money market instruments, such as T-bills, CP, or NCDs; pools them; and then sells shares of ownership to investors (see Table 12.1). Generally, MMMFs invest only in taxable securities, such as commercial paper and negotiable certificates of deposit, or only in tax-exempt government securities, such as T-bills. Investors can then choose which type of short-term liquid securities they would like to hold, taxable or nontaxable. MMMFs provide smaller firms and investors the opportunity to participate in the money market by facilitating smaller individual investment amounts.

Financial Instrument Typical Maturity Minimum Amount Issuer
Treasury bills 4–52 weeks $10,000 Federal government
Commercial paper 270 days $100,000 Businesses
Negotiable CDs 6 months $100,000 Financial institutions
MMMFs Investment companies
Federal funds 1 day $1 million Financial institutions

Table 12.1 Money Market Instrument Characteristics (Selected)

The market for federal funds is notable because the Federal Reserve (Fed) targets the equilibrium interest rate on federal funds as one of its most important monetary policy tools. The federal funds market traditionally consists of the overnight borrowing and lending of immediately available funds among depository financial institutions, notably domestic commercial banks. Financial institutions such as banks are required to keep a fraction of their deposits on reserve with the Fed. When banks find they are short of reserves and immediately need cash to meet reserve requirements, they can borrow directly from the Fed through the so-called “discount window” or purchase excess reserves from other banks in the federal funds market. Often, the maturity of a federal funds contract is as short as a single day or overnight. The participants in the market negotiate the federal funds interest rate. However, the Federal Reserve effectively sets the target interest rate range in the federal funds market by controlling the supply of funds available for use in the market.

Since the financial crisis of 2008, the activities and functioning of the federal funds market has changed. The federal funds rate is still the rate targeted by the Fed for monetary policy, but the participants have evolved for several reasons. The market now includes foreign banks and non-depository financial institutions, such as the Federal Home Loan Banks. These institutions do not need to meet Fed reserve requirements and are not required to keep reserves with the Fed. In addition, the Fed now pays interest to commercial banks for reserves held at the Federal Reserve banks. Paying interest on reserves reduces the incentive for domestic commercial banks to enter the federal funds market since they can already earn interest on their excess reserves.

Daily trading volume in the federal funds market from 2016 through 2020 ranged from a high of $115 billion in March of 2018 to a low of only $34 billion on December 31, 2020.2 The volume of federal funds activity is lower in periods of slower economic growth because banks have fewer good opportunities to issue loans and are less likely to be short of required reserves.

Bond Markets

Bond markets are financial markets that make payments to investors for a specific period of time. Investors decide how much to pay for a bond depending on how much they expect inflation to affect the value of the fixed payment. There are several types of bonds: government bonds, corporate bonds, and municipal bonds.

Government Bond Markets

In the section on money markets, we discussed T-bills, and we now discuss longer-term government securities in the form of Treasury notes and Treasury bonds.

We learned in Bonds and Bond Valuation that the federal government issues Treasury notes and bonds to raise money for current spending and to repay past borrowing. The size of the Treasury market is quite large, as the US federal government over the years has accumulated a total indebtedness of over $28 trillion dollars. The debt has grown so large we even have a real-time debt calculator online at https://www.usdebtclock.org/.

Treasury notes (T-notes) are US government debt instruments with maturities of 2, 3, 5, 7, or 10 years. The Treasury auctions notes on a regular basis, and investors may purchase new notes from TreasuryDirect.gov in the same way they would a T-bill. T-notes differ from T-bills in that they are longer term and pay semiannual coupon interest payments, as well as the par or face value of the note at maturity. T-bills, as you will recall, sell at a discount and pay the face value at maturity with no explicit interest payments. Upon issue of a note, the size, number, and timing of note payments is fixed. However, prices do change in the secondary market as interest rates change. Like T-bills, T-notes are generally exempt from state and local taxes.

Economists and investors keep a close eye on the 10-year T-note for several reasons. Mortgage lenders use it as a basis for setting and adjusting mortgage interest rates. In general, the rate on the 10-year T-note is a reliable market indicator of investor confidence.

There is an active secondary market for Treasury notes. From 2001 to 2020, the daily trading volume for Treasury notes has averaged $395 billion, or roughly five times the daily trading volume of T-bills. Treasury notes are the largest single type of government debt instrument, with over $11 trillion outstanding. As you can see from Figure 12.2, the Treasury dramatically increased borrowing by issuing notes following the 2008 financial crisis.

Brokers, dealers, and investment companies provide secondary market opportunities for individual and institutional investors. Exchange-traded funds (ETFs) are popular investment vehicles for many types of government T-bill, T-note, and T-bond portfolios. An ETF is a basket of securities that can trade like stocks on a stock exchange. For example, IEI is an iShares ETF managed by BlackRock that invests in Treasury securities with three to seven years to maturity. When investors buy this ETF, they purchase a small bundle of Treasury notes that they can buy or sell, just as if they owned an individual share of stock. ETFs are a convenient way for investors to own broad portfolios of securities while still being able to trade the whole group in a single transaction if they choose.

12.1 Overview of US Financial Markets - Principles of Finance | OpenStax (1)

Figure 12.2 Daily Trading Volume for US Treasury Notes and Bonds in Billions (data source: treasurydirect.gov)

Longer-term Treasury issues, Treasury bonds, have maturities of 20 or 30 years. T-bonds are like T-notes in that they pay semiannual coupon interest payments for the life of the security and pay the face value at maturity. They are longer term than notes and typically have higher coupon rates. T-bonds with maturities of 20 and 30 years are each auctioned only once per month. At the end of 2020, there were approximately $2.8 trillion of T-bonds outstanding, compared to approximately $11.1 trillion and $5 trillion of T-notes and T-bills.

In 1997, the Treasury began offering a new type of longer-term debt instrument, Treasury Inflation-Protected Securities, or TIPS. TIPS currently have maturities of 5, 10, or 30 years and are auctioned by the Treasury once per month. Like T-notes and T-bonds, they offer semiannual coupon interest payments for the life of the security and pay face value at maturity. The coupon interest rates are fixed, but the principal value adjusts monthly in response to changes in the consumer price index (CPI). Inflation and deflation cause the value of the principal to increase or decrease, which results in a larger or smaller semiannual coupon payment. With a total outstanding value of approximately $1.6 trillion at the end of 2020, TIPS are the smallest form of Treasury borrowing we have discussed.3

State and local governments and taxing districts can issue debt in the form of municipal bonds (munis). Local borrowing carries more risk than Treasury securities, and default or bankruptcy is atypical but possible. Thus, munis have ratings that run a spectrum similar to corporate bonds in that they receive a bond rating based on the perceived default risk. The defining feature of municipal bonds is that some interest payments are tax-free. Interest on munis (municipal bonds) is always exempt from federal taxes and sometimes exempt from state and local taxes. This makes them very attractive to investors in high income brackets.

There are two primary types of municipal bonds: revenue bonds and general obligation (GO) bonds. GO bonds generate cash flows to repay the bonds by taxing a project. For instance, a local school district may tax residents to pay for capital construction, or a city may tax citizens to pay for a new public works building. Revenue bonds, on the other hand, may apply to projects that generate sufficient cash flows to repay the bond—perhaps a utility or local toll road.

Corporate Bond Markets

Just as governments borrow money in the long-term from investors, so do corporations. A corporation often uses bank loans, commercial paper, or supplier credit for short-term borrowing needs and issues bonds for longer-term financing. Bond contracts identify very specific terms of agreement and outline the rules for the order, timing, and amount of contractual payments, as well as processes for when one or more of the required activities lapse. Indenture is the legal term for a bond contract. The indenture also includes limitations on the corporation for how they may use the bond proceeds.

A bond indenture includes both standard boilerplate contract language and specific conditions unique to a particular issue. Because of these non-standardized features of a bond contract, the secondary market for trading used bonds typically requires a broker, dealer, or investment company to facilitate a trade.

When a corporation uses a real asset, such as property or buildings, to guarantee a bond, the firm has issued a mortgage bond. However, it is more common for a corporation to issue an unsecured bond known as a debenture. The risk of a debenture reflects the risk of the entire corporation and does not rely on the value of a specific underlying asset, as is the case with a mortgage bond.

The risk a bondholder bears for buying a bond depends in part on the terms of the bond indenture, market conditions over the life of the bond contract, and the ability or inability of the firm to generate sufficient cash flows to meet its bond obligations. Fortunately, investors do not have to make these determinations about risk on their own. They can rely on bond rating services such as Moody’s, Standard and Poor’s, or Fitch to generate evaluations of the creditworthiness of bond issuers.

Ratings firms must adhere to rigorous standards when evaluating client creditworthiness. For example, Standard and Poor’s begins the explanation of its evaluation process with these paragraphs:

S&P Global Ratings provides a Credit Rating only when, in its opinion, there is information of satisfactory quality to form a credible opinion on creditworthiness, consistent with its Quality of the Rating Process – Sufficient Information (Quality of Information) Policy, and only after applicable quantitative, qualitative, and legal analyses are performed. Throughout the ratings and surveillance process, the analytical team reviews information from both public and nonpublic sources.”

“For corporate, government, and financial services company or entity (collectively referred to as “C&G” Credit Ratings), the analysis generally includes historical and projected financial information, industry and/or economic data, peer comparisons, and details on planned financings. In addition, the analysis is based on qualitative factors, such as the institutional or governance framework, the financial strategy of the rated entity and, generally, the experience and credibility of management.”4

Table 12.2 is a summary of how the three major credit rating agencies identify their ratings. Bond ratings are important for many reasons. The higher a firm’s rating, the lower the expected default risk and the lower the cost of borrowing for the firm. Pension funds may be restricted to investing in only medium- or higher-grade bonds. This could limit the number of investors who can participate in the market for lower-grade bonds, thereby reducing the liquidity, price, and tradability of those debt securities.

There are only two US companies with AAA credit ratings: Microsoft and Johnson & Johnson.5 Over the past 40 years, there has been a steady decline of AAA-rated companies (from sixty in 1980). Many institutions have found that this rating requires a more conservative approach to debt that can inhibit growth and revenue. So, in today’s market, credit ratings have begun to lose their importance. It seems that the ability to pay debts has become secondary to the potential for growth.

Fitch Moody’s S&P Bond Grade/Risk
AAA Aaa AAA Investment/low risk
AA Aa AA Investment/low risk
A A A Investment/low risk
BBB Baa BBB Investment/medium risk
BB Ba BB Junk/high risk
B B B Junk/high risk
CCC Caa CCC Junk/highest risk

Table 12.2 Credit Scale Ratings from the Three Credit Rating Agencies

Equity Markets

An important goal of firm managers is to maximize owners’ wealth. For corporations, shares of stock represent ownership. A corporation could have 100 shares, one million shares, or even several billion shares of stock. Stocks are difficult to value compared to bonds. Bonds typically provide periodic interest payments and a principal payment at maturity. The bond indenture specifies the timing and the amount of payments. Stocks might have periodic dividend payments, and an investor can plan to sell the stock at some point in the future. However, no contract guarantees the size of the dividends or the time and resale price of the stock. Thus, the cash flows from stock ownership are more uncertain and risky.

Corporations are the dominant form of business enterprise in the United States because of the ability to raise capital, the ease of transfer of ownership, and the benefit of limited liability to the owners. There are generally two types of stock, preferred and common. Preferred stock is a hybrid between common stock and bonds. Preferred stock has a higher claim to cash flows than common stockholders have (thus the term preferred), but it is lower than that of bondholders. In addition, preferred stock has fixed cash flows as bonds have and typically has no or few voting rights. Preferred stock dividends are after-tax payments by the corporation, as are common stock dividends, but bond interest payments, paid prior to taxes, are tax-deductible for firms. Of the three, preferred stock is the least used form of capital financing for corporations.

Common stockholders are the residual claimants and owners of the corporation. After all others who have a claim against the firm are paid, the common stockholders own all that remains. Common stockholders have voting rights, typically one vote per share, and choose the board of directors.

One popular way to rank the size of companies is to determine the value of their market capitalization, or market cap. Market cap is equal to the current stock price multiplied by the number of shares outstanding. According to the World Bank, the total market cap of US firms at the end of 2020 was $50.8 trillion, making up over half of the world’s total value of equity, estimated at $90 trillion.6 The largest US company at that time was Apple, followed by Microsoft, Amazon, Alphabet (Google), and Facebook. The largest company by sales volume in 2020 was Walmart.7

Geographical Location of Exchanges

Ownership is easily transferable for stocks that trade in one of the organized stock exchanges or in an over-the-counter (OTC) market. Definitions of a stock exchange and an OTC market blur as financial markets quickly adapt to innovations. However, stock markets have a centralized trading location, transactions require a broker to connect buyers and sellers, and the exchanges guarantee a basic level of liquidity so that investors are always able to buy or sell their stocks. An OTC market is an electronic market conducted on computer screens and consists of direct transactions among buyers and sellers, with no broker to bring the two together. Because there is no formal exchange present, it is possible that investors will have trouble finding buyers or sellers for their stocks.

Most of the trading consists of used or previously issued stocks in over-the-counter markets and organized exchanges. The two largest stock exchanges in the world, as measured by the market capitalization of the companies listed on the exchange, are the New York Stock Exchange (NYSE) and the NASDAQ. Both exchanges are located in the United States. Other large stock exchanges are located in Japan, China, Hong Kong, continental Europe, London, and Saudi Arabia.

Process of Offering Equities

The primary market is the market for new securities, and the secondary market is the market for used securities. When issuing new equity, the issuing firm receives the proceeds of the sale. Having an active secondary market makes it easier for corporations to issue stock, as investors know they can resell if desired. Most of the trading of equity securities is for used securities on the secondary market.

An initial public offering, or IPO, occurs when a firm offers stock to the public for the first time. With a typical IPO, a private company decides to raise capital and go public with the help of an investment banker. The investment banker agrees to provide financial advice, recommend the price and number of shares to issue, and establish a syndicate of underwriters to finance and ultimately distribute the new shares to investors (see Figure 12.3). An IPO is expensive for the issuing firm, and it can expect to incur costs of 5% to 8% or more of the value of the IPO. As of the end of 2020, the largest successful IPO belongs to Saudi Aramco, a petroleum company, valued at $25.6 billion at issue in December 2019.8 The Ant Group had planned an IPO valued at over $34 billion dollars in 2020, but as of the end of 2020 that issue was put on hold by the Chinese government.9

Institutional and preferred individual investors are typically the initial purchasers of IPOs. Smaller investors rarely have the opportunity to purchase. However, any investor can buy the new shares once available for public trading. Investment author and financial expert Professor Burton Malkiel cautions that buying IPOs immediately after issue can be a money-losing investment. He cites research showing that, historically, IPOs have underperformed the market by an average of 4% per year.10

Another way for a corporation to raise capital in the equity market is through a seasoned equity offering (SEO). An IPO occurs when a firm transitions from a private to a public company. An SEO takes place when a corporation that is already publicly traded issues additional shares of stock to the public. An SEO is often part of a SEC Rule 415 offering, or so-called shelf registration. Shelf registrations allow a company to register with the SEC to issue new shares but wait up to two years before issuing the shares. This gives companies the ability to register their intent to issue new shares and to “set them on the shelf” until market conditions are most favorable for issuance to the public.

12.1 Overview of US Financial Markets - Principles of Finance | OpenStax (2)

Figure 12.3 The IPO Process

Alternative Methods of Raising Capital

Special purpose acquisition companies (SPACs) were born in the 1990s and came of age in 2019.11 SPACs are a special form of IPO. We know that firms with products or services to sell and a documented operational and financial history often initiate an IPO to raise money by going public. A SPAC, however, is like an IPO that puts the cart before the horse. By this, we mean that rather than having a company ready to go public to raise capital, with a SPAC, a sponsor raises capital in anticipation of finding a firm ready to go public. This is why we sometimes refer to SPACs as “blank check” companies. Investors are providing capital to a firm that has no assets with the expectation that the sponsor will find a good investment.

Forming a SPAC shifts the risk and expenses associated with a firm going public. Because the money raised by the SPAC sponsor is the only asset, the process of filing with the SEC is less complicated, less expensive, and less time-consuming than filing an IPO. Often, when formed, a SPAC has a target company in mind, but this is not a requirement. Once the SPAC identifies a target firm, the sponsor can negotiate a purchase price and essentially merge with the target. Underpricing of IPOs is well documented,12 and the owners of a private company going public do not capture the significant increase in stock price that frequently occurs in the months following an IPO.

A SPAC offering allows the private firm owners to negotiate for a better price. A July 2020 study from Renaissance Capital reports that “of 223 SPAC IPOs conducted from the start of 2015 through July 2020, 89 have completed mergers and taken a company public.” According to the study, of those 89 mergers, “the common shares have delivered an average loss of 18.8% and a median return of minus 36.1%. That compares with the average after-market return from traditional IPOs of 37.2%” over the same time period.13

Sequence of Trade Execution

Investors who wish to trade stocks (buy or sell) execute trades via a broker. Many online brokers today will execute your trades at low to no cost once you have established a brokerage account. When trading, it is most common to make a market order or a limit order. A market order executes a trade at the current price, while a limit order specifies the price at which the investor is willing to buy or sell. Figure 12.4 provides a visual representation of how payment for an order flow works.

12.1 Overview of US Financial Markets - Principles of Finance | OpenStax (3)

Figure 12.4 The Order of Payments for Trade Executions

As a financial expert with a comprehensive understanding of money markets, bond markets, and equity markets, I'll provide a detailed breakdown of the concepts mentioned in the article:

Money Markets:

  1. Treasury Bills (T-bills):

    • Short-term debt instruments issued by the federal government.
    • Maturities of 4, 8, 13, 26, or 52 weeks.
    • Issued weekly through the Federal Reserve Bank of New York.
    • Very short maturities, broad secondary market, default-risk free, exempt from state and local income taxes.
  2. Commercial Paper (CP):

    • Short-term, unsecured debt security issued by corporations and financial institutions.
    • Used for short-term financing needs like inventory and receivables.
    • Maturity typically ranges from 30 days to 270 days.
    • Minimum face value of $100,000, sold at a discount, taxable, limited secondary market.
  3. Negotiable Certificates of Deposit (NCDs):

    • Large CDs issued by financial institutions with maturity of two weeks to six months.
    • Redeemable only at maturity, traded in a secondary market.
    • Sold in increments of $100,000 or more, no FDIC insurance, higher interest rates.
  4. Money Market Mutual Funds (MMMFs):

    • Investment companies (e.g., Vanguard, Fidelity) sell shares.
    • Purchase money market instruments (T-bills, CP, NCDs), pool them, sell shares to investors.
    • Provide liquidity and smaller investment amounts compared to direct market participation.
  5. Federal Funds:

    • Market where depository financial institutions borrow/lend immediately available funds.
    • Federal Reserve uses the federal funds rate as a monetary policy tool.
    • Traditionally overnight transactions, participants negotiate interest rates.

Bond Markets:

  1. Government Bonds:

    • Treasury Notes (T-notes) with maturities of 2, 3, 5, 7, or 10 years.
    • Treasury Bonds (T-bonds) with maturities of 20 or 30 years.
    • Treasury Inflation-Protected Securities (TIPS) with fixed coupon rates, adjusted principal.
  2. Municipal Bonds (Munis):

    • Issued by state and local governments, tax-free interest (federal and sometimes state/local).
    • Two primary types: General Obligation (GO) bonds and Revenue bonds.
  3. Corporate Bonds:

    • Issued by corporations for long-term financing.
    • Indenture (bond contract) specifies terms and conditions.
    • Two types: Mortgage bonds (secured by assets) and Debentures (unsecured).
  4. Bond Rating Agencies:

    • Moody’s, Standard and Poor’s, Fitch.
    • Ratings influence the cost of borrowing; higher rating, lower risk, lower borrowing costs.

Equity Markets:

  1. Stock Types:

    • Preferred Stock: Higher claim to cash flows, fixed dividends, fewer voting rights.
    • Common Stock: Residual claimants, ownership in the corporation, voting rights.
  2. Market Capitalization (Market Cap):

    • Value of a company's outstanding shares.
    • Largest US companies by market cap include Apple, Microsoft, Amazon, Alphabet, Facebook.
  3. Stock Exchanges:

    • NYSE and NASDAQ are major exchanges.
    • Centralized trading location, brokers connect buyers and sellers.
    • Over-the-Counter (OTC) market is electronic, lacks a centralized exchange.
  4. Initial Public Offering (IPO):

    • Occurs when a private company goes public, offering stock to the public for the first time.
    • IPO process involves an investment banker, underwriters, and initial purchasers.
  5. Seasoned Equity Offering (SEO):

    • A public company issues additional shares to the public.
    • Often part of a shelf registration, allowing the company to wait for favorable market conditions.
  6. Special Purpose Acquisition Companies (SPACs):

    • Blank check companies raising capital to find a target firm to take public.
    • Shifts risk and expenses associated with a traditional IPO.
  7. Trade Execution:

    • Investors execute trades through brokers, commonly using market orders or limit orders.
    • Market orders execute at the current price, while limit orders specify a desired price.

This breakdown covers the key concepts related to money markets, bond markets, and equity markets outlined in the provided article. If you have any specific questions or need further clarification on any of these topics, feel free to ask.

12.1 Overview of US Financial Markets - Principles of Finance | OpenStax (2024)


What is the PFMI summary? ›

The Principles for financial market infrastructures (PFMI) are the international standards aimed at ensuring that the infrastructure supporting financial markets is robust enough to withstand financial or operational shocks.

What are the principles of FMI? ›

An FMI should safeguard its own and its participants' assets and minimize the risk of loss on and delay in access to these assets. An FMI's investments should be in instruments with minimal credit, market, and liquidity risks.

What is a financial market quizlet? ›

A market in which financial assets (securities) such as stocks and bonds can be purchased or sold. Funds are transferred in financial markets when one party purchases financial assets previously held by another party.

What are the six principles of finance quizlet? ›

The six principles of finance include (1) Money has a time value, (2) Higher returns are expected for taking on more risk, (3) Diversification of investments can reduce risk, (4) Financial markets are efficient in pricing securities, (5) Manager and stockholder objectives may differ, and (6) Reputation matters.

What is the principle 17 of PFMI? ›

Principle 17: Operational risk (all) FMIs should identify, monitor and manage their general business risk. FMIs should hold sufficient liquid net assets funded by equity to cover potential general business losses so that they can continue their operations and services as a going concern if those losses materialise.

What are the risks of PFMI? ›

It is these specific risks that the PFMI aim to control and mitigate. The main financial market infrastructure risks are legal, liquidity, credit, business, custody, investment and operational risk.

What is FMI in finance? ›

Financial market infrastructures, also known as FMIs are different to banks. Essentially, they are the networks that allow financial transactions to take place and are commonly referred to as the plumbing of the financial system.

What is disclosure framework? ›

The disclosure framework uses the questions that have been developed for the assessment methodology to provide guidance for a comprehensive disclosure of the FMI's risks and risk management and other practices.

What is a financial market for dummies? ›

Financial markets are the places where individuals and firms trade assets such as stocks, bonds, commodities, and derivatives. The prices of all investments are derived from the offers and bids different investors make for them in markets.

What is financial market in one word? ›

A Financial Market is referred to space, where selling and buying of financial assets and securities take place. It allocates limited resources in the nation's economy. It serves as an agent between the investors and collector by mobilising capital between them.

What is the financial market a part of? ›

Within the financial sector, the term "financial markets" is often used to refer just to the markets that are used to raise finances. For long term finance, they are usually called the capital markets; for short term finance, they are usually called money markets.

What is PFMI disclosure? ›

In accordance with best-practice guidance issued by the Committee on Payments and Market Infrastructures and the Board of the International Organization of Securities Commissions (CPMI-IOSCO), OCC publishes disclosures concerning CPMI-IOSCO's Principles for Financial Market Infrastructures (PFMI).

What are the principles of Pfmis? ›

The Principles for financial market infrastructures are the international standards for financial market infrastructures, ie payment systems, central securities depositories, securities settlement systems, central counterparties and trade repositories.

What is the principle 23 of PFMI? ›

In particular, Principle 23 on the disclosure of rules, key procedures and market data states that an FMI should provide sufficient information to enable participants to have an accurate understanding of the risks and costs they incur by participating in the FMI.

What is the capital markets infrastructure? ›

Capital markets infrastructure providers are the platforms as well as the “pipes and plumbing” of global finance, offering a range of services that support financial institutions, companies, governments and investors in building businesses and contributing to growth in the wider economy.

Top Articles
Latest Posts
Article information

Author: Carlyn Walter

Last Updated:

Views: 5819

Rating: 5 / 5 (50 voted)

Reviews: 89% of readers found this page helpful

Author information

Name: Carlyn Walter

Birthday: 1996-01-03

Address: Suite 452 40815 Denyse Extensions, Sengermouth, OR 42374

Phone: +8501809515404

Job: Manufacturing Technician

Hobby: Table tennis, Archery, Vacation, Metal detecting, Yo-yoing, Crocheting, Creative writing

Introduction: My name is Carlyn Walter, I am a lively, glamorous, healthy, clean, powerful, calm, combative person who loves writing and wants to share my knowledge and understanding with you.